The multi-platform NetworkHD line offers pro AV and custom install integrators a choice of three separate AV over IP technologies, the installer can select the solution that best fits their specific application.
Adding to its low bandwidth NetworkHD 100 Series HD over 1GbE using H.264 and videowall and multiview-supporting 200 Series, and the low latency 400 Series 4K HDR over 1GbE with JPEG2000, the 600 Series adds powerful features for both commercial and residential applications.
“As the flagship solution in the WyreStorm’s extensive NetworkHD product line, the 600 Series brings the best picture quality and the lowest latency to the market,” said David Silberstein, WyreStorm Director of Technology. “With support for 4K/60 with HDR and SDVoE-powering a 10GbE network to eliminate compression artefacts, the quality is highest available. The benefits of this are not only felt in specialist or mission critical applications, such as medical, visualisation, and large-source monitoring in command and control applications, but also boardrooms, where real time images can be displayed with no image lag.”
The standardised hardware/software platform of SDVoE provides the firepower for the 600 Series. The highly scalable delivery of mathematically lossless, zero latency ultra-fast seamless switching of 4K/60Hz and HDR using RGB or YUV, along with audio, control, scaling, processing, encoding, and encryption, over 10Gb IP network.
4K video is supported up to 4,096 x 2,160 60Hz at 4:4:4 8bit or 4:2:2 12bit HDR-10 over both HDMI and DisplayPort, with Dolby Vision to be supported by the end of the year.
Fully HDCP v2.2 compliant, 600 Series encoders and decoders feature auto-switch or software selectable input ports, with EDID capture and assign. Plethora Engine video scaling, re-timing and colour space conversion, in addition to powerful routing enabling stream breakaway for video, audio and control further add to the feature set.
HDMI audio is supported up to any known format (Genlock), as is multichannel audio up to Dolby Atmos and DTS:X, and Dolby/DTS High Definition codecs for breakaway/routing. The 600 also supports audio embedding and de-embedding on encoder and decoder with DAC/ADC functionality, 8ch PCM audio downmix, and the creation of independent audio distribution via analogue ports.
NetworkHD 600 Series encoders and decoders are available from mid-April 2018, with dedicated NHD-000-RACK 7U eight-slot rack mount available from May 2018.
