Luminaire design consultancy David Morgan Associates (DMA) will present the new Radiant 3D LED Flex 40 linear system at Light + Building 2012, Messe Frankfurt, 15-20 April 2012 – Hall 4.2, Stand A16. This is the second time that the company has exhibited at the Light + Building Show. The Radiant 3D LED Flex 40 linear system is designed for use in a wide variety of interior and exterior architectural lighting applications where linear lighting needs to follow complex curves and building profiles. It is the middle of three sizes of the 3D LED Flex range and can operate at up to 40 watts per metre, giving an output of up to 2,500 lumens per metre. Joints between the heat sink LED modules allow the system to bend and twist in three dimensions while maintaining a constant LED spacing without dark spots or shadows and allowing the modules to be aimed after installation to provide a precise lit effect. The main lighting applications include indirect cove lighting and direct wall washing and wall grazing. This 40-watt system is available in interior versions (IP 20) and also in versions for exterior use with an IP 65 rating. For straight coves, a matching extruded profile is available which connects to the articulated sections without dark shadows allowing both straight and curved runs to be lit from a continuous system. The full range will include RGBW and adjustable colour temperature white versions and a variety of lenses and other secondary optics to control the light output. www.dmadesign.co.uk
