News ISE
installation logo

Origin Acoustics venture to debut at ISE 2015

Installation Staff 12 February 2015
Origin Acoustics venture to debut at ISE 2015

Jeremy Burkhardt and his two previous partners at SpeakerCraft, Ed Hasse and Ken Humphreys, have reunited to form Origin Acoustics, which is making its ISE debut this year. The new company consists of the team that invented the in-wall speaker and is launching several collections of loudspeakers for the architectural speaker market at ISE.

The 10 models that comprise the Composer collection of in-wall loudspeakers feature a new SpringLock mechanism that requires no tools, as the dogs are spring loaded and snap into place with a twist of a thumbnail. The precise amount of torque needed is placed on the drywall, avoiding any warping of the baffle or damage to the wall itself while securing the speaker and maintaining the seal between the exterior and interior air spaces.

A new surround technology is employed on all the woofers in the collection. The X-Wave butyl rubber surround is actively involved in absorbing 700-1,400Hz resonances that run up and down the woofer cone causing unwanted distortion.

The surround is also part of a progressive suspension system that becomes more rigid as the driver approaches its furthest excursion point. Origin says this results in greater control of the cone and less distortion at maximum volume levels.

The Dual Plane Stabilized Diaphragm (DPSD) tweeter is suspended at both the outside edge as well as at the peak of the dome. This improves linearity and power handling along with lower frequency extension.

Origin claims this allows the tweeter to crossover much lower to the woofer section, resulting in a major improvement in overall dispersion of the system.

The team also changed the aspect ratio of the baffle to closely mirror the Golden Mean. As a result, the longer and thinner profile is much more aesthetically pleasing in the home, says the company.

Stand: 5-S123

www.originacoustics.com

Similar stories